# What Should You Do When a Critical Monitoring Trend Goes Missing?

Field Answers · Monitoring & Smart Facility

What to do when a critical BMS or DCIM trend goes missing: treat it as a data availability issue, document it, escalate, and never assume conditions are normal.

2 min read Monitoring & Smart Facility Updated November 2026

On this page

1. [Short answer](https://datacentertraining.us/answers/monitoring-data-gap.html#answer)
2. [Why it matters](https://datacentertraining.us/answers/monitoring-data-gap.html#why)
3. [What to check](https://datacentertraining.us/answers/monitoring-data-gap.html#check)
4. [Example from the field](https://datacentertraining.us/answers/monitoring-data-gap.html#example)
5. [Related training](https://datacentertraining.us/answers/monitoring-data-gap.html#training)
6. [Follow-up question](https://datacentertraining.us/answers/monitoring-data-gap.html#faq)
7. [Sources](https://datacentertraining.us/answers/monitoring-data-gap.html#sources)
8. [Related questions](https://datacentertraining.us/answers/monitoring-data-gap.html#related)

[**Test yourself**Take the Operations & Monitoring quiz.](https://datacentertraining.us/quizzes/operations-quiz.html)

**Short answer:** A missing trend is an instrumentation or data-availability issue to document and escalate; staff should not infer normal conditions from the absence of a reading.

## Why it matters

A blank chart can conceal a sensor outage precisely when the team needs evidence to make a safe decision.

## What to check

- Identify point and gap duration
- Check related alarms and redundant measurements
- Record whether the gap affects a decision
- Track restoration and data quality review

## Example from the field

A chilled-water flow trend disappears during a maintenance window. The operator uses approved alternate indicators and notifies the controls owner rather than reading the blank as stable flow.

## Related training

The course on this site that covers this topic most directly is [Monitoring, Automation & BMS Systems](https://datacentertraining.us/courses/monitoring-automation-bms-systems.html), part of the Monitoring & Smart Facility track. Use it for role-based familiarization or as refresher training alongside your site procedures.

### [Monitoring, Automation & BMS Systems](https://datacentertraining.us/courses/monitoring-automation-bms-systems.html)

Monitoring & Automation · Comprehensive Program · BMS / DCIM

Design a monitoring and BMS strategy that catches problems before they cause downtime.

8 hrs

$276.99

- [Enroll](https://datacentertraining.us/checkout.html?item=monitoring-automation-bms-systems)
- [Add to Cart](https://datacentertraining.us/cart.html?add=monitoring-automation-bms-systems)

A certificate of completion is not a license or regulatory certification. It does not replace site-specific authorization, approved procedures, or task qualification, which your employer decides.

## Follow-up question

### Does no alarm mean a missing trend is normal?

No. Absence of data is not evidence of a normal condition.

## Sources

- ISA, [ISA-18 series of standards: management of alarm systems](https://www.isa.org/standards-and-publications/isa-standards/isa-18-series-of-standards).
- NIST, [SP 800-92, Guide to Computer Security Log Management](https://csrc.nist.gov/pubs/sp/800/92/final).

## Related questions

[Answer](https://datacentertraining.us/answers/alarm-shelving-controls.html)

### What Controls Should Apply When an Alarm Is Shelved?

Alarm shelving should be temporary, authorized, visible, reason-coded, and time-limited, with a defined owner…

Read the answer →

[Answer](https://datacentertraining.us/answers/bms-point-naming-convention.html)

### What Makes a Good BMS Point Naming Convention?

A point name should identify the system, location, equipment, and measured or commanded function consistently…

Read the answer →

[Answer](https://datacentertraining.us/answers/sensor-replacement-acceptance.html)

### How Do You Verify a Replacement Sensor Is Ready for Service?

Sensor acceptance should verify identity, placement, scaling, alarm logic, trend continuity, and comparison…

Read the answer →

[Answer](https://datacentertraining.us/answers/temperature-sensor-calibration-records.html)

### What Should a Temperature Sensor Calibration Record Include?

A calibration record should identify the sensor, method, reference, date, result, tolerance, and corrective…

Read the answer →

[Answer](https://datacentertraining.us/answers/dcim-capacity-assumptions.html)

### How Do You Keep DCIM Capacity Dashboards from Overpromising?

A capacity dashboard is only as reliable as its assumptions for rated limits, reserve margins, dependencies…

Read the answer →

[Guide](https://datacentertraining.us/learn/data-center-bms.html)

### Data Center BMS

The Knowledge Center guide for the Monitoring & Smart Facility track.

Read the guide →

[See every Monitoring & Smart Facility answer →](https://datacentertraining.us/answers/#monitoring)

This answer is general educational information for data center facility teams, not a site procedure, engineering advice, or a compliance determination. Follow your approved procedures and the requirements that apply to your site. Last updated November 2026.

## Train Your Facilities Team

Self-paced online courses for data center technicians, engineers, and managers, with a certificate of completion for every course.

- [See BMS & DCIM Training](https://datacentertraining.us/training/bms-dcim-training.html)
- [Browse All Courses](https://datacentertraining.us/courses.html)
- [Call 1-866-429-6742](tel:18664296742)

---

Markdown version of https://datacentertraining.us/answers/monitoring-data-gap.html · For AI agents: [llms.txt](https://datacentertraining.us/llms.txt) · [Developer portal](https://datacentertraining.us/developers/)
