Short answer: Containment gaps should be assessed for airflow impact, location, and the facility's intended pressure and temperature strategy; repairs should preserve access and life-safety requirements.
Why it matters
Small bypass paths can mix supply and return air and make cooling performance harder to predict.
What to check
- Map the gap and affected row
- Check temperature and pressure trends nearby
- Use approved materials and fire/life-safety review
- Recheck conditions after repair
Example from the field
A door closer leaves a persistent gap at one end of a row. The facilities lead logs it and checks nearby rack inlet trends before assigning repair.
Related training
The course on this site that covers this topic most directly is Cooling Systems Design & Optimization, part of the Cooling & Facilities Efficiency track. Use it for role-based familiarization or as refresher training alongside your site procedures.
Cooling Systems Design & Optimization
Cut cooling costs and improve reliability with modern thermal management strategy.
A certificate of completion is not a license or regulatory certification. It does not replace site-specific authorization, approved procedures, or task qualification, which your employer decides.
Follow-up question
Should every gap be sealed immediately with any available material?
No. Repair materials and access controls should be compatible with facility, fire, and manufacturer requirements.
Sources
- U.S. Department of Energy, FEMP, Best Practices Guide for Energy-Efficient Data Center Design.
- Lawrence Berkeley National Laboratory, Center of Expertise for Energy Efficiency in Data Centers.
- NFPA, NFPA 75, Standard for the Fire Protection of Information Technology Equipment.
Related questions
What Should You Measure in Thermal Mapping After Rack Density Changes?
Thermal mapping after density changes should focus on representative rack inlets, operating states, and known…
Read the answer → AnswerHow Do You Assess Remaining Airflow After a Fan Wall Failure?
After a fan-wall failure, teams should verify the remaining capacity and control response from approved…
Read the answer → AnswerHow Do You Match Perforated Floor Tiles to Rack Demand?
Floor tile selection should follow the cooling design and measured rack demand; tile placement and open area…
Read the answer → AnswerHow Should a Cooling Plant Be Staged for Redundancy and Efficiency?
Plant staging should be evaluated against current load, equipment operating limits, redundancy requirements…
Read the answer → AnswerWhat Should Teams Monitor About Outdoor Air for Economizer Operation?
Economizer operation should account for the designed operating envelope and relevant outdoor conditions, with…
Read the answer → GuideHow Data Center Cooling Works
The Knowledge Center guide for the Cooling & Facilities Efficiency track.
Read the guide →See every Cooling & Facilities Efficiency answer →
This answer is general educational information for data center facility teams, not a site procedure, engineering advice, or a compliance determination. Follow your approved procedures and the requirements that apply to your site. Last updated November 2026.