Short answer: Economizer operation should account for the designed operating envelope and relevant outdoor conditions, with control decisions based on approved sensors and site-specific risk criteria.
Why it matters
Outdoor conditions can change thermal performance and may introduce contaminants or moisture concerns depending on the system design.
What to check
- Review permitted operating conditions
- Verify sensor location and data quality
- Check filtration and maintenance status
- Trend indoor conditions during mode changes
Example from the field
An economizer enters a new mode during a dusty weather event. The facility team checks the approved environmental criteria and verifies the response through monitoring.
Related training
The course on this site that covers this topic most directly is Cooling Systems Design & Optimization, part of the Cooling & Facilities Efficiency track. Use it for role-based familiarization or as refresher training alongside your site procedures.
Cooling Systems Design & Optimization
Cut cooling costs and improve reliability with modern thermal management strategy.
A certificate of completion is not a license or regulatory certification. It does not replace site-specific authorization, approved procedures, or task qualification, which your employer decides.
Follow-up question
Can outside air be used whenever it is cooler than return air?
No. Temperature is only one consideration; the design's environmental and equipment limits control.
Sources
- ASHRAE, TC 9.9, Mission Critical Facilities, Data Centers, Technology Spaces and Electronic Equipment.
- U.S. Department of Energy, FEMP, Best Practices Guide for Energy-Efficient Data Center Design.
- U.S. Department of Energy, FEMP, Energy efficiency in data centers.
Related questions
How Should a Cooling Plant Be Staged for Redundancy and Efficiency?
Plant staging should be evaluated against current load, equipment operating limits, redundancy requirements…
Read the answer → AnswerHow Do You Match Perforated Floor Tiles to Rack Demand?
Floor tile selection should follow the cooling design and measured rack demand; tile placement and open area…
Read the answer → AnswerHow Should a Data Center Review a Humidity Excursion?
A humidity excursion review should capture the value, duration, location, sensor condition, and operating…
Read the answer → AnswerDo Small Gaps in Aisle Containment Door Seals Matter?
Containment gaps should be assessed for airflow impact, location, and the facility's intended pressure and…
Read the answer → Field guideData Center Airside Economizer Changeover: What Facilities Teams Should Verify Before Switching Modes
When outdoor conditions become favorable, should a data center facilities team switch from compressor-based…
Read the post → GuideHow Data Center Cooling Works
The Knowledge Center guide for the Cooling & Facilities Efficiency track.
Read the guide →See every Cooling & Facilities Efficiency answer →
This answer is general educational information for data center facility teams, not a site procedure, engineering advice, or a compliance determination. Follow your approved procedures and the requirements that apply to your site. Last updated November 2026.