Short answer: Floor tile selection should follow the cooling design and measured rack demand; tile placement and open area should not be changed informally to solve a local temperature issue.
Why it matters
Unplanned tile changes can divert supply air from other racks and create new hot spots.
What to check
- Check the approved airflow plan
- Review rack inlet data before moving tiles
- Coordinate changes with facilities control owner
- Measure again after the approved adjustment
Example from the field
A team moves a high-flow tile toward one rack without recording the original pattern. A later survey finds a neighboring rack warmer, so the layout is returned to engineering review.
Related training
The course on this site that covers this topic most directly is Cooling Systems Design & Optimization, part of the Cooling & Facilities Efficiency track. Use it for role-based familiarization or as refresher training alongside your site procedures.
Cooling Systems Design & Optimization
Cut cooling costs and improve reliability with modern thermal management strategy.
A certificate of completion is not a license or regulatory certification. It does not replace site-specific authorization, approved procedures, or task qualification, which your employer decides.
Follow-up question
Does a higher-open-area tile always improve cooling?
No. It changes distribution and can reduce supply to nearby locations if not evaluated as part of the system.
Sources
- U.S. Department of Energy, FEMP, Best Practices Guide for Energy-Efficient Data Center Design.
- Lawrence Berkeley National Laboratory, Center of Expertise for Energy Efficiency in Data Centers.
- ASHRAE, Thermal Guidelines for Data Processing Environments.
Related questions
How Should a Cooling Plant Be Staged for Redundancy and Efficiency?
Plant staging should be evaluated against current load, equipment operating limits, redundancy requirements…
Read the answer → AnswerWhat Should Teams Monitor About Outdoor Air for Economizer Operation?
Economizer operation should account for the designed operating envelope and relevant outdoor conditions, with…
Read the answer → AnswerDo Small Gaps in Aisle Containment Door Seals Matter?
Containment gaps should be assessed for airflow impact, location, and the facility's intended pressure and…
Read the answer → AnswerWhat Should You Measure in Thermal Mapping After Rack Density Changes?
Thermal mapping after density changes should focus on representative rack inlets, operating states, and known…
Read the answer → AnswerHow Do You Assess Remaining Airflow After a Fan Wall Failure?
After a fan-wall failure, teams should verify the remaining capacity and control response from approved…
Read the answer → GuideHow Data Center Cooling Works
The Knowledge Center guide for the Cooling & Facilities Efficiency track.
Read the guide →See every Cooling & Facilities Efficiency answer →
This answer is general educational information for data center facility teams, not a site procedure, engineering advice, or a compliance determination. Follow your approved procedures and the requirements that apply to your site. Last updated November 2026.